SPEED-i™

Integrated Camera: Adjustable forward-aim camera mounted inside the SPEEDsentry radar speed sign inconspiculously.

SPEEDsentry:Provides all the traffic calming and datalogging capabilities of this valuable sign. Visit the SPEEDsentry Product Tour for more details.

Positive PR:Residing inside the radar speed display, this imaging system only records those vehicles above your threshold that did not respond when they were informed of their speed.

Multiple Video Feeds: Recording multiple video feeds allows you to capture several fields of vision to record simultaneously into a single image.

Hot-Swap Hard Drive: The system comes with 2 hard drives that each store 36 hours of video so that the sign can always be recording.

Ethernet Offloading: You can download straight to your computer or server if directly connected.

No Manual Entry: All relevant information is embedded in the video at the time of recording so there is no chance to incorrectly match information.

Speed Limits: Compare the speed limit with the vehicle speed. You determine the difference that triggers recording.

Zoom Fields: (intentionally blurred) See the full context of the vehicle and a zoomed-in section of the plate or windshield permit.

Display Status: You'll know if the digits were on or off when you were recording.

Review Only Problem Clips: Condense an entire month of traffic into only a few minutes of several second highlights.

Export: Save the offending image with all its embedded statistics in JPG or AVI formats for use in other documents.

Quickly Find The Best Image: Drag the video to the image that provides the best view of the zoom area.

Universal Mounting Brackets: The trailer accommodates any ATS sign easily. If your sign changes because your needs change, you don’t need to change your trailer!

See-through Construction: Open frame design minimally blocks line of sight.

Rust-proof Upper: Aluminum upper structure eliminates the risk of rust.

Solar Charging During Storage: The panels fold facing upward when the sign is lowered, allowing the batteries to remain fully charged during storage.

High Leverage Lift Arm: You need minimal force to lift our largest sign and a 60W solar assembly.

Removable Parts Storage: Lock your removeable trailer tongue and lift arm in the trailer. Prevent unauthorized moving without carrying pieces around to store separately.

Secure: Locking provisions are available for the battery box, jack stands, raise/lower pivot, wheel nuts* and axle* to prevent tampering (*optional).

Lightweight: Weighs a well-balanced 550 lbs, including a pair of batteries. Tow and set up easily by one person.

Multiple Sizes: Available in approximately 20W, 60W (shown) or 120W capacities to fit the power needs of your configuration and location.

Universal Bracket: The pole bracket can be mounted to nearly any pole, whether single, multiple, small, large round or square.

Flexible Orientation: Change the connection point and angle of the bracket to ensure that the panel takes advantage of optimum sunshine.

Standard AC Supply (not shown): Available for the SPEEDsentry and SPEEDsentry Shield, this supply mounts within the sign and is appropriate for clean commercial AC sources.

Medium Duty AC Supply: Recommended for the SPEEDsentry and Shield, where a municipal AC source is being tapped. Uses additional surge protection and an industrial AC supply.

Heavy Duty AC Supply: Required for the instALERT or wherever there is a very dirty power source. Uses additional surge protection, an isolation transformer and an industrial AC supply.

Coming Soon: Details for this section are being built. In the meantime, please contact us with your requests, comments or ideas. Thanks!